Please use this identifier to cite or link to this item: http://hdl.handle.net/2307/40892
DC FieldValueLanguage
dc.contributor.advisorIUCCI, GIOVANNA-
dc.contributor.authorKopula Kesavan, Jagadesh-
dc.date.accessioned2022-11-24T16:25:06Z-
dc.date.available2022-11-24T16:25:06Z-
dc.date.issued2018-04-09-
dc.identifier.urihttp://hdl.handle.net/2307/40892-
dc.description.abstractConversion of environmental pollutant CO2 emitted by anthropogenic activities into valuable products offers a feasible way to reduce the CO2 accumulation in the atmosphere and balances the carbon cycle. CO2 conversion with renewable H2 to storable chemical fuel CH4, so called power to gas technology (PtG), has received increasing attention due to its many advantages. Dry reforming of methane (DRM) with CO2 offers valuable environmental benefits such as biogas utilization, removal of GHG and production of syn-gas with ratio of 1 (H2/CO2=1) which is suitable for the synthesis of oxygenated chemicals such as methanol, dimethyl ether (DME) and hydrocarbons by Fischer-Tropsch synthesis. CO2 methanation over Ni catalyst is a well-known process since 20th century, but many aspects concerning the catalysts are still under debate, such as role of particle size, role of support, role of metal concentration and preparation method etc. A part of this thesis is devoted to the development of suitable Ni based catalyst with high performance and stability for CO2 methanation and to understand the role of Ni0 metal concentration and of Ni0 particle size on the catalytic activity. Ni/YSZ catalysts were prepared by electroless plating method with different metal concentration and the impact of Ni0 metal concentration on CO2 methanation was studied. The CO2 conversion was directly dependent on the metal loading and the highest CO2 conversion and CH4 selectivity were achieved for the catalyst with largest Ni (12 wt%) loading. To investigate the role of Ni0 particle size, Ni(10 wt%)/YSZ catalysts were prepared by different methods, such as wet impregnation, wet impregnation with [NiEDTA]2- , electroless plating and mechanical mixing, in order to obtain different Ni0 particle size. The as prepared and used catalysts were characterized by complementary synchrotron (in-situ XAS) and laboratory based techniques (XRD, TPR, XPS, BET, HR-TEM). Among them, the catalysts prepared by wet impregnation with [NiEDTA]2- complex showed high activity (60 % CO2 conversion and 98 % CH4 selectivity at 350 °C) and stable performance. The Ni0 nanoparticle (19 nm) remained stable even after the 30 h time on stream (TOS) experiment without sintering and without forming any carbon filaments. The kinetic measurements confirmed that both reactants CO2 and H2 were activated on the Ni0 sites. To develop highly stable Ni based catalyst for DRM reaction, Co was added to Ni-CeO2 catalyst to suppress the carbon deposition and the role of Co was investigated. Five Ni-Co/CeO2 catalysts with Co molar concentration varying from 0 to 100 % were prepared by auto combustion method. The Ni-Co alloy formation and the reducibility of the catalyst were confirmed by H2-TPR, in-situ XRD and in-situ XAS. All catalysts showed remarkable stability during 30 h TOS experiment. HR-TEM and TGA analysis of spent catalysts showed very low carbon formation (<1 %) for Co rich catalyst and high carbon formation (17 %) for Ni rich catalyst. The kinetic measurements showed very low conversion at high GHSV (ml g-1 s -1 ) for Co rich catalyst. This clearly indicates that the Co was oxidized when CO2 stream was high. The partial pressure analysis further proved that O adatoms are adsorbed on Co and that the Co2+/0 redox cycle removes the intermediate carbonaceous species in subsequent step. The role of CeO2 nanostructures support in Ni-CeO2 and Ru-CeO2 catalysts on CO2 methanation and DRM reactions is presently under investigation and the preliminary results are highlighted in the future perspectives section.en_US
dc.language.isoenen_US
dc.publisherUniversità degli studi Roma Treen_US
dc.subjectNICKELen_US
dc.subjectCATALYSISen_US
dc.subjectXAFSen_US
dc.subjectXPSen_US
dc.subjectCERIAen_US
dc.titleSYNTHESIS AND CHARACTERIZATION OF HETEROGENEOUS CATALYSTS FOR CO2 VALORIZATIONen_US
dc.typeDoctoral Thesisen_US
dc.subject.miurSettori Disciplinari MIUR::Scienze fisiche::FISICA DELLA MATERIAen_US
dc.subject.isicruiCategorie ISI-CRUI::Scienze fisiche::Applied Physics/Condensed Matter/Materials Scienceen_US
dc.subject.anagraferoma3Scienze fisicheen_US
dc.rights.accessrightsinfo:eu-repo/semantics/openAccess-
dc.description.romatrecurrentDipartimento di Scienze*
item.fulltextWith Fulltext-
item.grantfulltextrestricted-
item.languageiso639-1other-
Appears in Collections:Dipartimento di Scienze
T - Tesi di dottorato
Files in This Item:
File Description SizeFormat
Thesis-SMNSC-XXX Cycle-Jagadesh Kopula Kesavan.pdf8.23 MBAdobe PDFView/Open
Show simple item record Recommend this item

Page view(s)

91
checked on Mar 28, 2024

Download(s)

25
checked on Mar 28, 2024

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.